Changzhou Qian Jing Rehabilitation Co., LTD.

It is used for the diagnostic placement of the required body position during manual therapy.

1) Choose different positions according to the needs of the therapist, so as to facilitate the treatment of patients in different positions.

2) The height and angle of the bed surface can be adjusted according to the needs of the rehabilitation bed, which is convenient for the therapist to massage and train the patient in multiple positions.

3) It can provide effective and convenient drainage level for some patients with lung-related diseases.

4) It can be used with other equipment for rehabilitation training.

Rehabilitation, orthopedics, traditional Chinese medicine, etc.

□ The bed is 2 meters long and 0.62 meters wide, and can carry patients up to 170 kg.

□ The overall bed surface is adjusted in three sections, and the inclination angle of the head board can be adjusted through the head controller to assist the patient to lift the head.

□ The inclination angle of the legs can be adjusted through the controller of the legs to help patients raise their lower limbs.

□ There are two sets of control buttons on the hand controller, and the upper control buttons are used to adjust the angle of the bed seat.

□ The control button below is used to adjust the lifting height of the whole bed surface.

□ The height of the bed surface can also be adjusted up and down through the foot controller, which is more conducive to liberating the hands of the therapist and reducing the risk of cross-infection during the treatment process.

□ The height of the bed surface can be adjusted to the height of the patient's wheelchair before training, which is convenient for the patient to transfer the bed and chair; during the treatment process, it can be adjusted to the corresponding height according to the height of the therapist or training needs, which is convenient for the therapist to operate.

□ The minimalist and practical pedals and lifting casters support the quick and convenient transfer and fixation of the training bed between different usage scenarios.

□ The head pillow is detachable and can be used for treatment of patients in prone position after disassembly.

Dimensions: 2020mm×650mm×490mm

Bed height adjustment range: 490mm～770mm

Turning angle of the head plate: -20°~40°

Leg flip angle: 0°~40°

Total size of bed board: 2020mm×620mm

Head plate size: 360mm×620mm

Backplane size: 530mm×620mm

Leg board size: 1050mm×620mm

Mass of the bed: 130kg

Input power: 200VA

normal working conditions

Ambient temperature: +5 ℃~+40 ℃

Relative humidity: ≤80%

Atmospheric pressure: 860 hPa ~ 1060 hPa Power supply: AC220 V±22 V, 50 Hz±1 Hz.